4SSH3.6/100-D90/1000 4inch solar screw pump with stainless steel helical rotor with mppt solar pump controller
MODEL SELECTION
| Model |
Power |
Voltage |
MAX. Flow |
MAX. Head |
Outlet |
| W |
HP |
Vdc |
Range |
m³/H |
M |
inch |
| 3INCH SCREW PUMP |
| 3SSH1.3/50-D24/140 |
140 |
0.2 |
24 |
18~55 |
1.3 |
50 |
3/4'' |
| 3SSH1.6/80-D36/400 |
400 |
0.6 |
36 |
18~60 |
1.6 |
80 |
3/4'' |
| 3SSH1.8/120-D60/600 |
600 |
0.8 |
60 |
32~100 |
1.8 |
120 |
3/4'' |
| 3SSH2.2/140-D72/900 |
900 |
1.2 |
72 |
32~100 |
2.2 |
140 |
3/4'' |
| 4INCH SCREW PUMP |
| 4SSH3.0/80-D72/650 |
650 |
0.8 |
72 |
32~100 |
3 |
80 |
1'' |
| 4SSH3.6/100-D90/1000 |
1000 |
1.3 |
90 |
32~155 |
3.6 |
100 |
1'' |
1) What's the water source? How's the water quality?
2) Flow rate per day or per hour?
3) What's the vertical head?
4) What's the horizontal distance between water source and application?
PUMP DETAILS
Discharge (Outlet)
AISI 304 SS
Screw (Helical Rotor)
Material: Rubber & AISI 304 SS
Pump Body & Filter
Material: All AISI 304 SS
Motor Rotor
Shaft - AISI 304 SS
Rotor lamination - Quantity is totally enough for corresponding motor power
Magnetic steel - N35UH NdFeB Magnet
Motor Stator
Reinforced plastic bobbin
100% enamelled copper wire
Stator lamination - Quantity is totally enough for corresponding motor power
Motor oil leakage test
5KGS pressure
90 seconds
Twice
CONTROLLER DETAILS
Controller Shell
Material - Die-cast aluminum Protection degree - IP54
Unique design with patent Good heat dissipassion
APPLICATIONS
Solar pumping system serves to provide water in remote applications where electrical grid power is either unreliable or unavailable. BLDC solar pump controller can direct use the DC power from PV array, and drive the brushless DC pumps. In sunny days, the pumping system can continuously pump water. There is no need of batteries or other energy storage devices. It's recommended to pump water to a reservoir for storage.
A float switch can be installed in the water tower to control the pump operation. And install a low-level probe in well to detect the well water so that pump will stop when there is no water. Below diagram shows a typical diagram of the solar pumping system, including major parts and components.
){kind=link}
){kind=link}